Step 1:  To start, place the spacer ring on one end of the mounting arm. This will create a stable base for the solar panel. Step 2: Next, wrap the hose clips around the mounting bracket to ensure a secure fit. Step 3: Then, tighten the hose clips around the pole to fix the bracket in place. Step 4: Follow this by screwing the mounting arm into the mounting bracket to create a sturdy foundation for the solar panel. Step 5: Now, screw the nut onto the other end of the mounting arm to complete the assembly.  Step 6: Finally, attach the solar panel to the mounting arm by screwing it in. This completes the installation process and secures the solar panel to the Birdfy Feeder for maximum solar energy collection.

Insert a microSD Card To insert the SD card into the Birdfy Feeder, you should locate the SD card slot at the top of the camera. Hold the SD card with the label facing the same way as the camera lens and gently slide it into the slot until you hear a clicking sound, indicating that it has been successfully inserted. This step allows you to capture and store bird feeding activity on the SD card for later viewing and analysis. Remove a SD card To remove the SD card from the Birdfy Feeder, you can use a SIM ejector tool or a paper clip to gently press the card, causing it to pop up. Then, you should carefully pull the card out of the slot. This step allows you to easily access the SD card's contents for reviewing, editing, or transferring to a computer for further processing.      To learn more about our fascinating stories about birds in nature.    Are Birds Mammals?    Bird Introduction - Eurasian Blue Tit Bird    

Step 1: To replace the original perch of the Birdfy Feeder, you should turn the white perch screw counter-clockwise to loosen its hold on the perch. Then, remove the perch from the feeder. Step 2: To install the Humme Extension onto the Birdfy Feeder base, you should align the hole on the inner side of the extension with the screw hole on the feeder base. Then, push the extension onto the base firmly until it clicks into place. Step 3: To remove the Humme Extension from the Birdfy Feeder base, you should lift the buckles on both ends of the extension and pull it out. This step allows you to disassemble the extension for cleaning, repairing, or storing it away when not in use.

Guidance on disassembling and cleaning Birdfy Feeder Bamboo.

Guidance on mounting the Birdfy Feeder Bamboo.